Polycarbonate Injection Molding

$0.1——80 USD

The injection molding mold may rust due to the corrosion of the mold by the decomposition products of the molding material, hand sweat or the resurgence of the mold, so how should we effectively prevent the mold from rusting? The following points are for your reference to extend the service life of the mold as much as possible without affecting the production efficiency. Sheet Metal Fabrication Service.Custom Sheet Metal Fabrication Service. Small quantity Sheet Metal Fabrication Service....

$0.1——80 USD

An injection mold is a tool for producing plastic products; it is also a tool for giving plastic products complete structure and size. The structural form of the injection mold and the processing quality of the mold directly affect the quality and production efficiency of the plastic parts. Injection mold assembly is an important post-process in the injection mold manufacturing process. The quality of the mold is closely related to the mold assembly. The mold parts are processed through...

$0.1——80 USD

Assemble the fixed mold base plate, assemble the fixed mold base plate on the upper surface of the fixed mold plate, and pay attention to check that the joint surfaces of the two plates need to fit together without shaking. Assemble the gate bushing, adjust the matching position of the gate bushing hole in the center of the fixed die base plate and the fixed die plate, fit the gate bushing into it, and ensure that the lower end surface of the gate bushing is flush with the parting surface of...

$0.1——80 USD

Assemble the gate washer fastening screw, adjust the matching position of the gate washer and the screw hole of the fixed die base plate, screw in the screw, and tighten the screw in a symmetrical manner. Assemble the pipe joints, install the pipe joints on the cooling water hole ends on both sides of the fixed template, and pay attention to the sealing of the installation place. Assemble the movable mold component and select the component assembly reference part.Custom ABS Plastic parts...

$0.1——80 USD

A mold is composed of many mold parts. The quality of non-standard mold parts directly affects the quality of the mold, and the final quality of non-standard mold parts is guaranteed by finishing. Processing matters.In most domestic mold manufacturing enterprises, the methods used in the finishing stage are generally grinding, electrical machining and fitter processing. At this stage, it is necessary to control many technical parameters such as part deformation, internal stress, shape tolerance...

$0.1——80 USD

Injection molding precision machining is an industry with a wide range of knowledge, strong technical and practicality. Plastic raw materials, toners, nozzle materials, molds, injection molding machines, peripheral equipment, tooling fixtures, sprays, various accessories and packaging materials, etc. are required in the production process of injection molding precision processing, which brings great importance to the management of injection molding workshops. Compared with other industries or...

$0.1——80 USD

Injection molding precision processing and production requires 24 hours of continuous operation, generally in two shifts. The injection molding workshop has many jobs, complicated division of responsibilities, and different skill requirements for different positions. In order to make the production and operation of the injection molding workshop smooth, it is necessary to manage the personnel, materials, equipment, tools, etc. involved in each link and each post, mainly including: raw material...

$0.1——80 USD

Material price x product weight The color parts can be calculated according to the raw material price, while the black parts can be calculated according to the specific return material or product requirements. The processing cost is related to the number of mold cavities, the molding cycle and the weight of the product; the machine can calculate how much per second based on the tonnage, but if the number of mold cavities is large, the weight is heavy, and the molding cycle is short, the...

$0.1——80 USD

The price of the mold must first be selected from steel, and then evaluated according to the size and structure of the product, such as whether to polish, whether to tan, etc. This involves many processes, and the mold processing cycle is also long, depending on the product.Custom plastic Injection molding for auto parts。Injection Molding, small quantity Injection Molding.Injection Molding service.custom Injection Molding service. Advantages Of Plastic Injection Molding From...

$0.1——80 USD

At the 83rd China International Medical Equipment Expo not long ago, Zhang Qiang, chairman and CEO of Shanghai United Imaging Medical Technology Co., Ltd., told reporters in an interview, "The high-end medical equipment industry has developed for over a hundred years, and innovative technologies continue to emerge. New technologies such as AI and 5G are leading the industry into a new era of intelligence and digitization." According to him, "Enterprises will explore the construction of an...

$0.1——80 USD

It is reported that the digital project of this exhibition is developed according to the needs of the Chinese market. It includes five functional modules such as remote guarding and digital medicine and engineering, and realizes the intelligent management of equipment in an all-round way. According to reports, the Noah fever clinic solution exhibited at the same time has multiple features such as 5G remote application, multi-modal flexible configuration, etc. It can meet the needs of existing...

$0.1——80 USD

Both TPE and TPU are soft materials and have good rubber elasticity. The hardness range of TPE is medium to low hardness, while the hardness of TPU is medium to high hardness; products made of TPU have a rough hand feel and strong friction resistance; while products made of TPE , the hand feel is more delicate and soft, and the friction performance is weak. TPE material has wear resistance, average strength, strong adhesion to PC, rapid prototyping, not easy to stick to molds, easy to control...

$0.1——80 USD

Injection molding of plastic products is a method of die-casting plastic raw material particles through molds. This auto parts retainer is used in a large amount and the product is small. We will give it a little more holes, so that the production efficiency is high.Custom plastic injection molding electronic housing parts。Injection Molding, small quantity Injection Molding.Injection Molding service.custom Injection Molding service. Advantages Of Plastic Injection Molding From...

$0.1——80 USD

Because it is necessary to open the mold to customize the auto parts holder, the first step is to open the mold. Therefore, when choosing a manufacturer, you must check whether there is a mold manufacturing and processing capability, and check whether the necessary equipment such as CNC equipment, mirror spark machine, and two-dimensional three-dimensional equipment is not necessary. Complete, followed by the ability and experience of the engineer. A good master can not only make a good mold,...

$0.1——80 USD

The external and internal shapes of the plastic parts are directly formed by the cavity and the core. These complex three-dimensional profiles are difficult to process, especially the blind hole type internal molding surface processing of the cavity. If traditional processing methods are used, not only It requires workers with high technical level, many auxiliary fixtures, many tools, and a long processing cycle.Custom injection molding high performance plastic products Advantages Of Plastic...

$0.1——80 USD

At present, the dimensional accuracy requirements of general plastic parts are IT6-7, and the surface roughness is Ra0.2-0.1μm. The corresponding dimensional accuracy requirements of injection mold parts are IT5-6, and the surface roughness is below Ra0.1μm. The roughness of the recording surface of the laser disc should reach the level of 0.02-0.01μm of mirror processing, which requires the surface roughness of the mold to reach 0.01μm or less.Customized PP abs injection parts mould...

$0.1——80 USD

Long-life injection molds are necessary to improve high efficiency and reduce costs. At present, the service life of injection molds generally requires more than 1 million times. Precision injection molds should use a rigid mold base, increase the thickness of the template, and add support columns or conical positioning elements to prevent the mold from deforming under pressure. Sometimes the internal pressure can reach 100MPa.Injection Molding, small quantity Injection Molding.Injection...

$0.1——80 USD

The ejection device is an important factor affecting the deformation and dimensional accuracy of the product, so the best ejection point should be selected to make the demolding uniform everywhere. Most of the high-precision injection molds are inlaid or fully assembled in structure, which requires the machining accuracy and interchangeability of mold parts to be greatly improved.Injection Molding Companies Fabrication Custom。Injection Molding, small quantity Injection Molding.Injection Molding...

$0.1——80 USD

Mold manufacturing is not the ultimate goal, but the final product design is proposed by the user. The mold manufacturer designs and manufactures the mold according to the user's requirements. In most cases, the injection production of the product is also performed by other manufacturers. In this way, product design, mold design and manufacture and product production are carried out in different places.OEM/ODM Household plastic injection mould part machining.Injection Molding, small quantity...

$0.1——80 USD

The production batch of the mold is small, which is generally a single-piece production, but the mold needs a lot of standard parts, ranging from a mold base to a small thimble. These cannot and cannot be completed by only one manufacturer alone, and the manufacturing process is complex, common equipment and numerical control. Equipment usage is extremely uneven.rapid tooling machining components precision rotomoulding.Injection Molding, small quantity Injection Molding.Injection Molding...